What is Tetrachloroethylene and how is it used?

Tetrachloroethylene (TCE) is a colorless organic liquid with a mild, chloroform-like odor. Its greatest use is in the textile industry, and as a component of aerosol dry-cleaning products.

The list of trade names given below may help you find out whether you are using this chemical at home or work.

Trade Names and Synonyms:

• Ethylene tetrachloride
• Perchloroethylene
• PCE
• Ankilostin
• Didakene
• Fedal-un
• Nema
• Perclene
• Persec
• Tetlen
• Tetracap
• Tetraleno
• Tetropil
• Antisal 1
• Dow-per
• Perawin
• Perchlor
• Percosolv
• Perk
• Perklone
• Tetraguer
• Tetralex
• Tetravec

Why is Tetrachloroethylene being Regulated?

In 1974, Congress passed the Safe Drinking Water Act. This law requires EPA to determine safe levels of chemicals in drinking water which do or may cause health problems. These non-enforceable levels, based solely on possible health risks and exposure, are called Maximum Contaminant Level Goals.

The MCLG for TCE has been set at zero because EPA believes this level of protection would not cause any of the potential health problems described below.

Based on this MCLG, EPA has set an enforceable standard called a Maximum Contaminant Level (MCL). MCLs are set as close to the MCLGs as possible, considering the ability of public water systems to detect and remove contaminants using suitable treatment technologies.

The MCL has been set at 5 parts per billion (ppb) because EPA believes, given present technology and resources, this is the lowest level to which water systems can reasonably be required to remove this contaminant should it occur in drinking water.

These drinking water standards and the regulations for ensuring these standards are met, are called National Primary Drinking Water Regulations. All public water supplies must abide by these regulations.

What are the Health Effects?

Short-term: EPA has found TCE to potentially cause the following health effects when people are exposed to it at levels above the MCL for relatively short periods of time: damage to liver, kidney, and central nervous system.

Long-term: TCE has the potential to cause the following effects from a lifetime exposure at levels above the MCL: detrimental effects to liver, kidney, and central nervous system; cancer.

How much Tetrachloroethylene is produced and released to the environment?

Production of tetrachloroethylene was 405 million lbs in 1986. Major releases of tetrachloroethylene to air and water are from dry cleaning and industrial metal cleaning or finishing. Water pollution can occur from tetrachloroethylene leaching from vinyl liners in some types of pipelines used for water distribution, and during chlorination water treatment.

From 1987 to 1993, according to EPA's Toxic Chemical Release Inventory, tetrachloroethylene releases to land and water totalled over 1 million lbs. These releases were primarily from alkali and chlorine industries which use it to make other chemicals. The largest releases occurred in Louisiana and South Carolina.

What happens to Tetrachloroethylene when it is released to the environment?

TCE released to soil will readily evaporate or may leach slowly to the groundwater. Its break down by soil microbes is slow. TCE released to water will primarily evaporate and has little potential for accumulating in aquatic life.

How will Tetrachloroethylene be Detected in and Removed from My Drinking Water?

The regulation for TCE became effective in 1992. Between 1993 and 1995, EPA required your water supplier to collect water samples every 3 months for one year and analyze them to find out if TCE is present above 0.5 ppb. If it is present above this level, the system must continue to monitor this contaminant.

If contaminant levels are found to be consistently above the MCL, your water supplier must take steps to reduce the amount of TCE so that it is consistently below that level. The following treatment methods have been approved by EPA for removing TCE: Granular activated charcoal in combination with Packed Tower Aeration.

How will I know if Tetrachloroethylene is in my drinking water?

If the levels of TCE exceed the MCL, 5 ppb, the system must notify the public via newspapers, radio, TV and other means. Additional actions, such as providing alternative drinking water supplies, may be required to prevent serious risks to public health.

Drinking Water Standards:

	Mclg:  zero                   
	Mcl:   5 ppb

	Tetrachloroethylene Releases to Water and Land, 
	1987 to 1993 (in pounds):
	                              Water          Land
	TOTALS (in pounds)            297,602        750,104

	Top Five States*

	LA                            23,639         610,518
	SC                            104,728        0
	NH                            62,150         0
	NC                            42,192         13,102
	IL                            0              40,500
	TX                            36,144         720
	OH                            0              32,170
	IN                            1,300          27,000
	CO                            0              11,000
	IA                            5,112          0 

	Major Industries*

	Alkalis, chlorine             63,472         611,242
	Leather tanning,finishing     62,150         0
	Cotton fabric finishing       51,577         0
	Misc textile finishing        48,082         2,000
	Knit outwear mills            45,808         0
	Misc. apparel, access.        0              40,500
	Transportation Equip.         3,750          27,000
	Ammunition                    0              20,575
	Misc Chem. preparations       0              11,102
	Petroleum refining            0              11,000
	Ordnance, accessories         0              10,100

	* Water/Land totals only include facilities with releases 
	greater than a certain amount - usually 1000 to 10,000 lbs.