What is Xylene and how is it used?

A xylene is any of a group of very similar organic compounds. They are clear liquids with a sweet odor. The greatest use of xylenes is as a solvent which is much safer than benzene. Other uses include: in gasoline as part of the BTX component (benzene-toluene-xylene); Xylene mixtures are used to make phthalate plasticizers, polyester fiber, film and fabricated items.

The list of trade names given below may help you find out whether you are using this chemical at home or work.

Trade Names and Synonyms:

• Dimethyl benzene
• Xylol
• Methyltoluene
• Violet 3

Why is Xylene being Regulated?

In 1974, Congress passed the Safe Drinking Water Act. This law requires EPA to determine safe levels of chemicals in drinking water which do or may cause health problems. These non-enforceable levels, based solely on possible health risks and exposure, are called Maximum Contaminant Level Goals.

The MCLG for xylenes has been set at 10 parts per million (ppm) because EPA believes this level of protection would not cause any of the potential health problems described below.

Based on this MCLG, EPA has set an enforceable standard called a Maximum Contaminant Level (MCL). MCLs are set as close to the MCLGs as possible, considering the ability of public water systems to detect and remove contaminants using suitable treatment technologies.

The MCL has been set at 10 ppm because EPA believes, given present technology and resources, this is the lowest level to which water systems can reasonably be required to remove this contaminant should it occur in drinking water.

These drinking water standards and the regulations for ensuring these standards are met, are called National Primary Drinking Water Regulations. All public water supplies must abide by these regulations.

What are the Health Effects?

Short-term: EPA has found xylenes to potentially cause the following health effects when people are exposed to it at levels above the MCL for relatively short periods of time: disturbances of cognitive abilities, balance, and coordination.

Long-term: Xylenes has the potential to cause the following effects from a lifetime exposure at levels above the MCL: damage to the central nervous system, liver and kidneys.

How much Xylene is produced and released to the environment?

Production of xylenes was 6.84 billion lbs. in 1993. Major environmental releases of xylenes are due to evaporation from the refining and use of petroleum products. It may also be released by leaks or spills during the transport and storage of gasoline and other fuels. Xylenes are a natural products of many plants, and are a component of petroleum and coal tar.

From 1987 to 1993, according to EPA's Toxic Chemical Release Inventory, xylene releases to land and water totalled nearly 4.8 billion lbs. These releases were primarily from petroleum refining industries. The largest releases occurred in Texas. The largest direct releases to water occurred in New Jersey and Georgia.

What happens to Xylene when it is released to the environment?

Most of the xylenes are released into the atmosphere where they are quickly degraded by sunlight. When released to soil or water, xylenes will quickly evaporate. They may leach into ground water and persist there for several years. There is little potential for accumulation in aquatic life.

How will Xylene be Detected in and Removed from My Drinking Water?

The regulation for xylenes became effective in 1992. Between 1993 and 1995, EPA required your water supplier to collect water samples every 3 months for one year and analyze them to find out if xylenes is present above 0.5 ppb. If it is present above this level, the system must continue to monitor this contaminant.

If contaminant levels are found to be consistently above the MCL, your water supplier must take steps to reduce the amount of xylenes so that it is consistently below that level. The following treatment methods have been approved by EPA for removing xylenes: Granular activated charcoal in combination with Packed Tower Aeration.

How will I know if Xylene is in my drinking water?

If the levels of xylenes exceed the MCL, 10 ppm, the system must notify the public via newspapers, radio, TV and other means. Additional actions, such as providing alternative drinking water supplies, may be required to prevent serious risks to public health.

Drinking Water Standards:

	Mclg:  10 ppm
	Mcl:   10 ppm

	Xylene Releases to Water and Land, 
	1987 to 1993 (in pounds):

	                              Water          Land
	TOTALS (in pounds)            875,943        3,897,738

	Top Ten States*

	TX                            30,853         2,099,734
	NJ                            294,437        280,759
	IL                            36             206,990
	IN                            0              145,079
	AL                            34,361         59,022
	CA                            0              91,500
	MI                            0              86,774
	GA                            68,310         15,000
	VA                            50,100         33,000
	WA                            27,860         52,360

	Major Industries*

	Petroleum refining            131,817        2,678,958
	Metal barrels, drums          5              289,542
	Textile finishing, misc.      278,454        0
	Misc. Industrial chems.       95,706         69,696
	Extruded Aluminum prod.       1,265          138,798
	Furniture, fixtures           0              91,500
	Cotton fabric finishing       68,310         15,000
	Wood office furniture         0              67,677
	Pharmaceuticals               52,285         3,100
	Paper mills                   52,480         2,122

	* Water/Land totals only include facilities with releases 
	greater than a certain amount - usually 1000 to 10,000 lbs.